Hardware Installations and Upgrades
Figure 66. Installing a SSD
Removing a Solid State Drive
1.
Disconnect cables (see letter
A
).
2.
Remove the two screws to release the Solid State Drive carrier (see letter
B
).
3.
Pull the Solid State Drive up to remove from the air duct (see letter
C
).
4.
Remove the four screws to release the Solid State Drive (see letter
D
).
5.
Pull the Solid State Drive up to remove from the carrier (see letter
E
).
6.
Secure the Solid State Drive carrier to chassis with the two screws.
42
Intel
®
Server System R2000LH2/LT2 Service Guide
