Hardware Installations and Upgrades
Figure 58. Installing an Optical Drive
Removing a Slimline Optical Drive
1.
Remove the cables (see letter
A
). Slide the optical drive out (see letter
B
and
C
).
Figure 59. Removing the Slimline Optical Drive
2.
If no device will be installed in this location, install a filler panel in this location.
Installing and Removing the Intel
®
I/O Expansion Module
Before installing or removing the Intel
®
I/O expansion module, please make sure following steps are
performed.
1.
Ensure the AC power cord(s) are disconnected from the system.
2.
Remove the system cover. For instructions, see
3.
Remove the power supply modules. For instructions, see
Removing the Power Supply
Module(s)
.
4.
Remove the PCI riser assemblies. For instructions, see
Removing the PCI Riser Assembly
36
Intel
®
Server System R2000LH2/LT2 Service Guide
