Server System Features
Intel
®
Server System R1000EP Service Guide
37
Figure 58.Installing the Intel® Integrated RAID Module RMS25JB0x0
5.
Connect the proper cables into the adapter using the 4-port combined end. Make sure the
module and cables are properly attached and plug the cable into connector at the inside edge of
the adapter.
Note:
To prevent throughput problems:
—Use the cables provided or use the shortest possible cable.
—Do not use cables longer than one meter.
—Decrease the maximum length by one foot if you are using a backplane.
—Do not use cross-over cables.
—Only connect to a SATA drive, SAS or SATA backplane, or anexpander device.
—Route the cables carefully.
—Check that the module and cables are all properly attached.
Summary of Contents for R1000EP series
Page 12: ......
