Intel R1000EP series, Service Manual

Page: 24 / 72

Server System Features
12 Intel
®
Server System R1000EP Service Guide
2 Hardware Installations and Upgrades
Before You Begin
Before working with your server product, pay close attention to the “Safety Information” at the
beginning of this manual.
Note:
Whenever you service the system, you must first power down the server and unplug all peripheral
devices and the power cord.
Tools and Supplies Needed

Phillips* (cross head) screwdriver (#2 bit)

Needle nosed pliers

Anti-static wrist strap and conductive foam pad (recommended)
System Reference
All references to left, right, front, top, and bottom assume the reader is facing the front of the
chassis as it would be positioned for normal operation.
Note: The Intel
®
Server System R1208EP2SHFN and R1304EP2SHFN
are shown for illustration purposes. Server components with the product family are identical.
Cable Routing
When you add or remove components from your server system, make sure your cables are routed
correctly before reinstalling the server system cover. Use caution to make sure no cables or wires
are pinched and that the airflow from the fans is not blocked. Use the figures below to determine
the correct cable routing.
Note: Red lines are for power connection, dot lines are for optional device connection.