Intel R1000EP series, Service Manual

Page: 22 / 72

Server System Features
10 Intel
®
Server System R1000EP Service Guide
Slimline Optical Drive Support
The system has support for a single optical drive. The optical drive is NOT hot-swappable. The
system power must be turned off to insert or remove the slimline optical drive. For instructions on
installing an optical drive, see “Installing or Removing a Slimline Optical Drive”.
Intel
®
makes the following optical drive accessory kits available for this server system:

Slimline DVD-ROM Drive: AXXSATADVDROM

Slimline DVD-RW Drive: AXXSATADVDRWROM
Note: For a complete list of supported peripherals, go to http://serverconfigurator.intel.com.
Bezel
The front bezel is available as optional accessory for the server system:
Figure 11. Front view of Front Bezel
Hot-Swap SAS/SATA Backplane
The Hot-Swap SAS/SATA backplane serves as an interface between the mother board and the
system drives. The following diagrams show the location for each connector found on the
backplane.
4 x 3.5-inch Hard Drive Backplane
A SAS/SATA Hot-swap Connectors
Figure 12. 4 x 3.5-inch Hard Drive Backplane Components (Front View)