Intel P4208CP4MHGC, Quick Installation User'S Manual

Page: 12 / 17

8
General Installation Process
12
Install RMM4 EMI Cover (optional)
13
Install Alternate Serial Port (optional)
C
Serial B
Connector
Server
Board
B
D
Chassis
Back
Opening
Filler
A
A
Remove the alternate serial port knockout by
pressing the knockout from inside the chassis.
B
Mount the serial serial port on the rear panel of the chassis.
C
secure the port with two screws.
D
Connect the cable to the Serial B Connector on your server board.
Caution: Carefully remove the knock out with screwdriver, directly removing it
with finger has potential risk.
Caution: Care should be used when attaching or removing this cable.
Mishandling the cable could cause damage.
11
Install Intel® Remote Management Module 4 NIC (optional)
Top View
A
A
Attach the metal fastening bracket to Intel
®
Dedicated Server Management NIC module and
secure the bracket with two screws.
B
Remove the alternate RMM4 knock out by pressing the knock out from inside the chassis.
C
Connect the cable to the cable connector on the Intel
®
Dedicated Server Management NIC module.
D
Mount the NIC module to the rear panel of the chassis and secure the bracket with two screws.
E
Connect the cable to the RMM4 NIC connector to the RMM4 NIC connector on your server board.
Caution: Carefully remove the knock out with screwdriver, directly removing it with finger has potential risk.
Caution: Care should be used when attaching or removing this cable. Mishandling the cable could cause damage.
Server
Board
A RMM4
NIC Connector
Server
Board
C
E
Chassis
Back
Opening
Filler
D
B
B
A
Install the KMM4 EMI cover with
thumb screws.