Intel P4000M Service Manual Download Page 92

Page: 92 / 111

Hardware Installations and Upgrades

Intel

Server Chassis P4000M Service Guide

Installing and/or Removing a Expander card

Installing the Expander card

1. Observe the safety and ESD precautions at the beginning of this book.

2. Power down the server and unplug all peripheral devices and the AC power cable.

3. Remove the chassis cover. For instructions, “Removing the Chassis Cover”.

4. Remove the fans. For instructions, see “Removing the Fixed Fan” or “Removing the Hotswap Fans”.

5. Remove the Fixed HDDs or Hotswap drive cages. For instructions, see “Remove Fixed Hard Drives”,

or “Remove 8x3.5 Hotswap Drive Cage Assemble”, or “Remove 8x2.5 Hotswap Drive Cage

Assemble”.

6. Locate the expander card bracket in the chassis. Mount the expander card to the bracket with screws.

Figure 129. Installing the Expander Card

7. Connect the data cable between server board and expander card, and between expander and

backplane(s). See documents for your server boards for instructions.

8. Install the Fixed HDDs or Hotswap drive cages. For instructions, see “Install Fixed Hard Drives”, or

“Install 8x3.5 Hotswap Drive Cage Assemble”, or “Install 8x2.5 Hotswap Drive Cage Assemble”.

9. Install the fans. For instructions, see “Install the Fixed Fan” or “Install the Hotswap Fans”.

10. Install the chassis cover. For instructions, “Install the Chassis Cover”.

Removing the Expander card

1. Observe the safety and ESD precautions at the beginning of this book.

2. Power down the server and unplug all peripheral devices and the AC power cable.

3. Remove the chassis cover. For instructions, “Removing the Chassis Cover”.

4. Remove the fans. For instructions, see “Removing the Fixed Fan” or “Removing the Hotswap Fans”.

5. Remove the Fixed HDDs or Hotswap drive cages. For instructions, see “Remove Fixed Hard Drives”,

or “Remove 8x3.5 Hotswap Drive Cage Assemble”, or “Remove 8x2.5 Hotswap Drive Cage

Assemble”.

Summary of Contents for P4000M
















































































































Search results

Summary of Contents for P4000M

Reviews:

Related manuals for P4000M

Brands by name

Popular brands

Intel P4000M, Service Manual

Search results

Summary of Contents for P4000M

Reviews:

Related manuals for P4000M

Brands by name

Popular brands