Hardware Installations and Upgrades
Intel
®
Server Chassis P4000M Service Guide
77
9. Installing the front panel tray with the front panel board. For instructions, see “Installing the Front
Panel Tray”.
10. Install the front bezel. For instructions, see “Removing and Installing the Front Bezel”.
11. Install the air duct based on board requirement.
14. Install the chassis cover. For instructions, see “Installing the Chassis Cover”.
15. Plug all peripheral devices and the AC power cable into the server.
16. Power up the server.
Installing Alternate Serial Port
1. Observe the safety and ESD precautions at the beginning of this book.
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the chassis cover. For instructions, see “Removing the Chassis Cover”.
4. Remove the alternate serial port knockout by pressing the knockout from inside the chassis.
Figure 127. Removing the Alternate Serial Port Knockout
5. Install the serial port on the rear panel of the chassis. Connect the cable to the Serial B Connector on
your motherboard.
Figure 128. Installing the Alternate Serial Port Knockout
Summary of Contents for P4000M
Page 14: ......
