Hardware Installations and Upgrades
42
Intel
®
Server Chassis P4000M Service Guide
Removing and Installing Second 8x2.5'' Hotswap Hard
Disk Drive Cage Assembly
/
NOTE
This procedure applies only to the Intel
®
Server Chassis P4000M family with two 8x2.5'' hotswap hard disk
drive cage configuration.
Removing Second 8x2.5'' Hotswap Hard Disk Drive Cage
Assembly
1. Observe the safety and ESD precautions at the beginning of this book.
2. Power down the server and unplug all peripheral devices and the AC power cable.
3. Remove the chassis cover. For instructions, see “Removing the Chassis Cover”.
4. Remove the front bezel if it is installed. For instructions, see “Removing the Front Bezel (Pedestal
Only)”.
5. Disconnect the power and data cables to the backplane.
6. Use screwdriver to release the hotswap hard drive cage (see letter
A
) from the chassis and remove
the hotswap hard drive cage (see letter
B
).
Figure 65. Removing the bottom 8x2.5
''
Hotswap HDD Cage Assembly
Summary of Contents for P4000M
Page 14: ......
