•
Off: the system functioning normally.
•
Steady
Amber
: the system requires some attention, which could indicate one of
the following conditions:
— The switch temperature is at a warning level
— The switch silicon temperature is at a warning level
— DC voltages on the board are slightly out of tolerance
Spine Module LEDs
Figure 67.
Spine Module LEDs
Module Status (Stat)
The status LED indicates one of the following conditions:
•
Steady
Green
: the module is operating normally.
•
Blinking
Green
: LED test state.
•
Off: module is in the removable state.
Module Attention (Attn)
The Attention LED indicates one of the following conditions:
•
Off: the system functioning normally.
•
Steady
Amber
: the system requires some attention, which could indicate one of
the following conditions:
— The switch temperature is at a warning level
— The switch silicon temperature is at a warning level
— DC voltages on the board are slightly out of tolerance
•
Blinking
Amber
(once every four seconds): LED test state.
2.8.2.3
Intel
®
Omni-Path Fabric—Installation
Intel
®
Omni-Path Fabric Switches Hardware
Installation Guide
June 2019
82
Doc. No.: H76456, Rev.: 10.0
