Figure 32.
Unpacking the Switch (7)
6. Remove the plastic bag, then remove the support shelf from the top of the switch.
Installation Tasks
The following section details rack mounting instructions for the 6-slot and 24-slot
Intel
®
Omni-Path Director Class Switch 100 Series. The installations are very similar;
the majority of steps apply to both switches. Where applicable, any specifics for either
the 6-slot or 24-slot Director are called out.
Installing the Support Shelf
1. Measure the inside distance between the front and middle rails on the cabinet (27"
in the following example).
2.4.3
2.4.3.1
Installation—Intel
®
Omni-Path Fabric
Intel
®
Omni-Path Fabric Switches Hardware
June 2019
Installation Guide
Doc. No.: H76456, Rev.: 10.0
51
