manualshive.com logo in svg

Intel Omni-Path Director Class Switch Series, Installation Manual

Share
Download
Intel Omni-Path Director Class Switch Series Installation Manual Download Page 3

Revision History

For the latest documentation, go to: 

http://www.intel.com/omnipath/SwitchPublications

.

Date

Revision

Description

June 2019

10.0

• Updated the 

FM Switch

 LED description.

• Edge switch product naming. Updated remaining instances of

"unmanaged" to "externally-managed" wherever applicable.

April 2019

9.0

Added Appendix B 

Director Switch Cable Management

 on page 90.

February 2019

8.0

• Added an Edge switch cable port connection limitation statement to

the section 

Cable Distances

 on page 28.

• The section 

Updating the Management Module IP Addresses in a

Director Class Redundant Management Configuration

 on page 75

was updated to use the boot command moduleip.

April 2018

7.0

• Added Figure 57, "48-Port Leaf Module Port Numbering"
• Added 

Q7 BIOS Update

 on page 86

April 2017

6.0

• Updated Air Baffle information in "Installing the Airflow Baffles"
• Added module installation information for the Omni-Path Fabric

Edge Hot Swap in "Installing the Edge Switch Hot-Swap Power and

Fan Modules".

December 2016

5.0

Document updated for Revision 5.0

August 2016

4.0

Document updated for Revision 4.0

May 2016

3.0

Document updated for Revision 3.0

February 2016

2.0

Document updated for Revision 2.0

November 2015

1.0

Document updated for Revision 1.0

Revision History—Intel

®

 Omni-Path Fabric

Intel

®

 Omni-Path Fabric Switches Hardware

June 2019

Installation Guide

Doc. No.: H76456, Rev.: 10.0

3

Summary of Contents for Omni-Path Director Class Switch Series




























































































Reviews:

No comments

Brands by name

Popular brands

Load more brands