Intel MFSYS25 - AXXPSU 1000W Power Supply Module User Manual Download Page 53 | Manualshive

Page: 53 / 164

background image

Intel® Modular Server System MFSYS25 User Guide

41

4

Configuring the Server Chassis

This section provides an overview of the Intel

®

Modular Server Control for the Intel

®

Modular Server System MFSYS25. The Intel

®

Modular Server Control User Interface

(UI) provides complete system hardware management by enabling users to securely
configure and monitor the system. The system is intended to be managed over a secure,
private management network. It is recommended that the Intel

®

Management Module not

be connected to a publicly accessible network.

Full system management is only supported via the Intel

®

Modular Server Control. In

addition to the Intel

®

Modular Server Control UI, administrators can access system-level

information remotely using released SNMP MIBs. However, the SNMP MIBs only
provide read-only access; system settings cannot be modified.

This section covers initial required configuration steps as well as how to launch and
navigate the Intel

®

Modular Server Control UI.

Introduction

The Intel

®

Management Module provides a simple and intuitive browser-based graphical

user interface that IT administrators can use to monitor and configure the Intel

®

Modular

Server System MFSYS25. This GUI is referred to as the Intel

®

Modular Server Control

UI. No CDs or additional installation steps are required to use the UI. To initially launch
the UI and configure the system hardware, a default static IP address and user account are
provided. Once logged into the UI, IT administrators can:

•

Quickly access system and component information.

•

Configure and manage storage sub-systems, including but not limited to:

— Create, delete and/or rename a storage pool

— Create, delete, rename and/or reassign a virtual drive to a server

— Create or delete hot spares

•

Configure and manage switch modules, including but not limited to:

— Configure VLAN and port settings

— Reset switch module

— Launch an Advanced Configuration for additional switch configuration features

•

Quickly view hardware inventory, system event logs, storage allocation and system
configuration reports.

•

Easily view current status for all hardware components (servers, hard drives, switch
modules, storage controllers, management module, cooling modules, and power
modules).

«
...
51
52
53
54
55
...
»

Summary of Contents for MFSYS25 - AXXPSU 1000W Power Supply Module





































































































































































Reviews:

No comments

Related manuals for MFSYS25 - AXXPSU 1000W Power Supply Module

Brand: ACTi Pages: 15

Brand: MSI Pages: 107

Brand: Syncronorm Pages: 17

Brand: DataOn Storage Pages: 36

System4 Seriver

Brand: Philips Pages: 48

Brand: Advantech Pages: 76

Brand: Advantech Pages: 92

Brand: Kystar Pages: 46

DIGIARRAY DA-4000E

Brand: Digiever Pages: 9

SuperServer 520P-WTR

Brand: Supermicro Pages: 114

SuperStorageSystem SSG-5019D8-TR12P

Brand: Supermicro Pages: 131

Brand: Intel Pages: 117

Brand: Square One Pages: 63

Brand: Sphere3D Pages: 2

Brand: SVT Pages: 16

Brand: Digitus Pages: 173

Brand: Inspur Pages: 2

Brand: 3Svision Pages: 135

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands