Intel MB960 Page 28 User Manual Download

Page: 28 / 65

BIOS SETUP

MB960 User’s Manual

ACPI Settings

Aptio Setup Utility

Main

Advanced

Chipset

Boot

Security

Save & Exit

Enable ACPI Auto Configuration Disabled

Enable Hibernation

Enabled

ACPI Sleep State

S3 (Suspend to R…)

Lock Legacy Resources

Disabled

→

←

Select Screen

↑↓

Select Item

Enter: Select
+- Change Field
F1: General Help

F2: Previous Values
F3: Optimized Default

F4: Save ESC: Exit

Enabled ACPI Auto Configuration

Enables or Disables BIOS ACPI Auto Configuration.

Enable Hibernation

Enables or Disables System ability to Hibernate (OS/S4 Sleep State). This
option may be not effective with some OS.

ACPI Sleep State

Select the highest ACPI sleep state the system will enter, when the SUSPEND
button is pressed.

Lock Legacy Resources

Enabled or Disabled Lock of Legacy Resources.

Trusted Computing

Aptio Setup Utility

Main

Advanced

Chipset

Boot

Security

Save & Exit

TPM Configuration
TPM SUPPORT

Disabled

Current TPM Status Information

TPM SUPPORT OFF

→

←

Select Screen

↑↓

Select Item

Enter: Select
+- Change Field
F1: General Help

F2: Previous Values
F3: Optimized Default

F4: Save ESC: Exit

TPM Support

This configuration is supported only with MB960AF. Enables or Disables TPM
support. O.S. will not show TPM. Reset of platform is required.

Summary of Contents for MB960


































































Search results

Summary of Contents for MB960

Reviews:

Related manuals for MB960

Brands by name

Popular brands

Intel MB960, User Manual

Search results

Summary of Contents for MB960

Reviews:

Related manuals for MB960

Brands by name

Popular brands