Intel® Server System M50CYP2UR Family System Integration and Service Guide
60
3.5.4
OCP* Adapter with Ejector Latch Installation
Figure 64. OCP* adapter with Ejector Latch Installation
1.
Ensure the latch is in the open position.
2.
Push the OCP* adapter forward until the right side of the latch contacts the rear panel (see Letter A).
3.
Rotate the latch towards the inside to get the OCP* adapter engaged with the connectors and close the
latch (see Letter B).
3.5.5
OCP* Adapter with Ejector Latch Removal
Figure 65. OCP* Adapter with Ejector Latch Removal
1.
Push the latch on the left side of the OCP* adapter (see Letter A) and pull the latch out (see Letter B).
2.
Using the latch, pull the adapter out of the system (see Letter C).
