Intel® Server Board M50CYP2SB Family Technical Product Specification
143
Figure 78. Processor Heat Sink Anti-tilt Wires in the Outward Position
5.
Set the anti-tilt wires to the outward position.
6.
Turn the heat sink over and place it bottom side up on a flat surface.
7.
Remove the plastic protective film from the Thermal Interface Material (TIM).
Figure 79. Pin 1 Indicator of Processor Carrier Clip
8.
Align Pin 1 indicator of processor carrier clip with the corner cut-out on the heat sink.
Note:
For the standard 2U or 1U heat sink, there are two cut-out corners; either can be used to align Pin 1
indicators.
9.
Gently press down the heat sink onto the processor carrier clip until it clicks into place.
10.
Ensure all four heat sink corners are securely latched to the carrier clip tabs.