Intel® Server System M20NTP1UR - System Integration and Service Guide
53
6.
System Service and FRU Replacement
This chapter provides instruction for replacement of system components considered to be field replaceable
(FRU). Only system features that are identified as hot-swappable can be replaced while the system remains
operational. These items include:
•
Power Supply – In redundant 1+1 dual power supply configurations only
•
Drives mounted within the front drive bay – Redundant RAID (1, 5, and 10) configurations only
All other components within the system can only be serviced after the system has been powered off and AC
power cord(s) and all other cables have been disconnected from the server system.
Before You Begin
Before integration of any system components, review all the safety and ESD precautions found in the Safety
Warnings section at the beginning of this document.
System Reference
In the following procedures, all references to left, right, front, top, and bottom assume the reader is facing
the front of the server chassis.
Instruction Format
Each procedure described in this chapter follows an illustration first format. This format gives the reader the
option to follow a quicker path to component integration by first seeing an illustration of the intended
procedure. If necessary, the reader can then follow the step-by-step instructions that accompany each
procedure.
Summary of Contents for M20NTP1UR
