Intel® Server System M20MYP1UR System Integration and Service Guide
34
3.
Option and Accessory Kit Integration and Service
This chapter provides instructions for the integration of system components within a server system that has
the server board and other system components pre-installed. It includes installation instructions for
supported system options and other available accessory option kits.
Before You Begin
Before working with your server product, observe the safety and ESD precautions found in the Warnings
section at the beginning of this manual.
Tools and Supplies Needed
•
Anti-static wrist strap and conductive workbench pad (recommended)
•
Phillips* (cross head) screwdriver (#2 bit)
•
Flat head screwdriver
System Reference
All references to left, right, front, top, and bottom assume the reader is facing the front of the chassis.
Internal Cable Routing
See Section 3.1, Internal Cable Routing.
Instruction Format
Each procedure described in this section follows an illustration first format. This format gives the reader the
option to follow a quicker path to system integration by first seeing an illustration of the intended procedure.
If necessary, the reader can then follow the step-by-step instructions that accompanies each procedure.
