Intel® Server System M20MYP1UR System Integration and Service Guide
21
Figure 12. Plastic processor socket cover removal
1.
Remove the plastic cover from the processor socket on the server board.
2.
Hold the processor cover on both sides as shown in the above figure (see Letter A).
3.
Carefully pull it up and away from the processor socket, ensuring no contact is made with any of the pins
within the socket (see Letter B).
Note:
The processor socket cover should be saved for future use.
Caution:
When re-installing the socket cover, make sure it properly snaps into place. Improper installation
will cause it to become loose and may damage the processor socket.
The
assembled
PHM and the processor socket include several alignment features to ensure the PHM can
only be installed one way.
Care should be taken to ensure components are accurately assembled and the
PHM is oriented correctly to the processor socket prior to placement onto the server board.
Figure 13. PHM alignment features
