manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE, Manual

Share
Download
Intel ITANIUM ARCHITECTURE Manual Download Page 513

4:506

Volume 4: IA-32 SSE Instruction Reference

CVTTSS2SI: Scalar Single-FP to signed INT32 Conversion (truncate)

Operation:

r32 = (int) (xmm/m32[31-0]);

Description:

The CVTTSS2SI instruction converts a SP FP number to a signed 32-bit integer and 
returns it in the 32-bit integer register; if the conversion is inexact, the truncated result 
is returned. If the converted result is larger than the maximum signed 32 bit value, the 
Integer Indefinite value (0x80000000) will be returned.

FP Exceptions:

None.

Numeric Exceptions: 

 Invalid, Precision.

Protected Mode Exceptions:

#GP(0) for an illegal memory operand effective address in the CS, DS, ES, FS or GS 
segments; #SS(0) for an illegal address in the SS segment; #PF (fault-code) for a page 
fault; #UD if CR0.EM = 1; #NM if TS bit in CR0 is set; #AC for unaligned memory 
reference. To enable #AC exceptions, three conditions must be true(CR0.AM is set; 
EFLAGS.AC is set; current CPL is 3; #XM for an unmasked SSE numeric exception 
(CR4.OSXMMEXCPT =1); #UD for an unmasked SSE numeric exception 
(CR4.OSXMMEXCPT =0); #UD if CRCR4.OSFXSR(bit 9) = 0; #UD if CPUID.XMM(EDX 
bit 25) = 0.

Real Address Mode Exceptions:

Interrupt 13 if any part of the operand would lie outside of the effective address space 
from 0 to 0FFFFH;

 

#UD if CR0.EM = 1; #NM if TS bit in CR0 is set; #XM for an 

unmasked SSE numeric exception (CR4.OSXMMEXCPT =1); #UD for an unmasked SSE 
numeric exception (CR4.OSXMMEXCPT =0); #UD if CRCR4.OSFXSR(bit 9) = 0; #UD if 
CPUID.XMM(EDX bit 25) = 0.

Virtual 8086 Mode  Exceptions:

Same exceptions as in Real Address Mode; #AC for unaligned memory reference if the 
current privilege level is 3; #PF (fault-code) for a page fault.

Additional Itanium System Environment Exceptions

 Itanium Reg Faults Disabled FP Register Fault if PSR.dfl is 1, NaT Register 

Consumption Fault

 Itanium Mem Faults VHPT Data Fault, Data TLB Fault, Alternate Data TLB Fault, Data 

Page Not Present Fault, Data NaT Page Consumption Abort, Data 

Key Miss Fault, Data Key Permission Fault, Data Access Rights 

Fault, Data Access Bit Fault

Opcode

Instruction

Description

F3,0F,2C,/r

CVTTSS2SI r32, xmm/m32

Convert lowest SP FP from XMM/Mem to one 32 bit signed 
integer using truncate, and move the result to an integer 
register. 

Summary of Contents for ITANIUM ARCHITECTURE





























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands