manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE, Manual

Share
Download
Intel ITANIUM ARCHITECTURE Manual Download Page 511

4:504

Volume 4: IA-32 SSE Instruction Reference

CVTTPS2PI: Packed Single-FP to Packed INT32 Conversion 

(truncate)

Operation:

mm[31-0]   = (int) (xmm/m64[31-0]);

mm[63-32]  = (int) (xmm/m64[63-32]);

Description:

The CVTTPS2PI instruction converts the lower 2 SP FP numbers in xmm/m64 to 2 32-bit 
signed integers in mm; if the conversion is inexact, the truncated result is returned. If 
the converted result(s) is/are larger than the maximum signed 32 bit value, the Integer 
Indefinite value (0x80000000) will be returned.

FP Exceptions:

None.

Numeric Exceptions: 

 Invalid, Precision.

Protected Mode Exceptions:

#GP(0) for an illegal memory operand effective address in the CS, DS, ES, FS or GS 
segments; #SS(0) for an illegal address in the SS segment; #PF (fault-code) for a page 
fault; #UD if CR0.EM = 1; #NM if TS bit in CR0 is set; #MF if there is a pending FPU 
exception; #AC for unaligned memory reference. To enable #AC exceptions, three 
conditions must be true(CR0.AM is set; EFLAGS.AC is set; current CPL is 3); #XM for an 
unmasked SSE numeric exception (CR4.OSXMMEXCPT =1); #UD for an unmasked SSE 
numeric exception (CR4.OSXMMEXCPT =0); #UD if CRCR4.OSFXSR(bit 9) = 0; #UD if 
CPUID.XMM(EDX bit 25) = 0.

Real Address Mode Exceptions:

Interrupt 13 if any part of the operand would lie outside of the effective address space 
from 0 to 0FFFFH;

 

#UD if CR0.EM = 1; #NM if TS bit in CR0 is set; #MF if there is a 

pending FPU exception; #XM for an unmasked SSE numeric exception 
(CR4.OSXMMEXCPT =1); #UD for an unmasked SSE numeric exception 
(CR4.OSXMMEXCPT =0); #UD if CRCR4.OSFXSR(bit 9) = 0; #UD if CPUID.XMM(EDX 
bit 25) = 0.

Virtual 8086 Mode  Exceptions:

Same exceptions as in Real Address Mode; #AC for unaligned memory reference if the 
current privilege level is 3; #PF (fault-code) for a page fault.

Additional Itanium System Environment Exceptions

 Itanium Reg Faults Disabled FP Register Fault if PSR.dfl is 1, NaT Register 

Consumption Fault

 Itanium Mem Faults VHPT Data Fault, Data TLB Fault, Alternate Data TLB Fault, Data 

Page Not Present Fault, Data NaT Page Consumption Abort, Data 

Key Miss Fault, Data Key Permission Fault, Data Access Rights 

Fault, Data Access Bit Fault

Opcode

Instruction

Description

0F,2C,/r

CVTTPS2PI mm, xmm/m64

Convert lower 2 SP FP from XMM/Mem to 2 32-bit signed 
integers in MM using truncate.

Summary of Contents for ITANIUM ARCHITECTURE





























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands