Intel ITANIUM ARCHITECTURE Manual Download Page 33

Page: 33 / 604

4:26

Volume 4: Base IA-32 Instruction Reference

ADC—Add with Carry

(Continued)

Protected Mode Exceptions

#GP(0)

If the destination is located in a nonwritable segment.
If a memory operand effective address is outside the CS, DS, ES, FS,

or GS segment limit.
If the DS, ES, FS, or GS register is used to access memory and it

contains a null segment selector.

#SS(0)

If a memory operand effective address is outside the SS segment

limit.

#PF(fault-code)

If a page fault occurs.

#AC(0)

If alignment checking is enabled and an unaligned memory

reference is made while the current privilege level is 3.

Real Address Mode Exceptions

#GP

If a memory operand effective address is outside the CS, DS, ES, FS,

or GS segment limit.

#SS

If a memory operand effective address is outside the SS segment

limit.

Virtual 8086 Mode Exceptions

#GP(0)

If a memory operand effective address is outside the CS, DS, ES, FS,

or GS segment limit.

#SS(0)

If a memory operand effective address is outside the SS segment

limit.

#PF(fault-code)

If a page fault occurs.

#AC(0)

If alignment checking is enabled and an unaligned memory

reference is made.

Summary of Contents for ITANIUM ARCHITECTURE





























































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for ITANIUM ARCHITECTURE

Reviews:

Brands by name

Popular brands

Intel ITANIUM ARCHITECTURE, Manual

Search results

Summary of Contents for ITANIUM ARCHITECTURE

Reviews:

Brands by name

Popular brands