manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE, Manual

Share
Download
Intel ITANIUM ARCHITECTURE Manual Download Page 219

4:212

Volume 4: Base IA-32 Instruction Reference

INC—Increment by 1

Description

Adds 1 to the operand, while preserving the state of the CF flag. The source operand 
can be a register or a memory location. This instruction allows a loop counter to be 
updated without disturbing the CF flag. (Use a ADD instruction with an immediate 
operand of 1 to perform a increment operation that does updates the CF flag.)

Operation

DEST 

 DEST - 1;

Flags Affected

The CF flag is not affected. The OF, SF, ZF, AF, and PF flags are set according to the 
result.

Additional Itanium System Environment Exceptions

Itanium Reg Faults  NaT Register Consumption Abort.
Itanium Mem FaultsVHPT Data Fault, Nested TLB Fault, Data TLB Fault, Alternate Data 

TLB Fault, Data Page Not Present Fault, Data NaT Page Consumption 

Abort, Data Key Miss Fault, Data Key Permission Fault, Data Access 

Rights Fault, Data Access Bit Fault, Data Dirty Bit Fault

Protected Mode Exceptions

#GP(0)

If the operand is located in a nonwritable segment.
If a memory operand effective address is outside the CS, DS, ES, FS, 

or GS segment limit.
If the DS, ES, FS, or GS register is used to access memory and it 

contains a null segment selector.

#SS(0)

If a memory operand effective address is outside the SS segment 

limit.

#PF(fault-code)

If a page fault occurs.

#AC(0)

If alignment checking is enabled and an unaligned memory 

reference is made while the current privilege level is 3.

Real Address Mode Exceptions

#GP

If a memory operand effective address is outside the CS, DS, ES, FS, 

or GS segment limit.

#SS

If a memory operand effective address is outside the SS segment 

limit.

Opcode

Instruction

Description

FE /0

INC 

r/m8

Increment 

r/m

 byte by 1

FF /0

INC 

r/m16

Increment 

r/m

 word by 1

FF /0

INC 

r/m32

Increment 

r/m

 doubleword by 1

40+ 

rw

INC 

r16

Increment word register by 1

40+ 

rd

INC 

r32

Increment doubleword register by 1

Summary of Contents for ITANIUM ARCHITECTURE





























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands