manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE, Manual

Share
Download
Intel ITANIUM ARCHITECTURE Manual Download Page 204

Volume 4: Base IA-32 Instruction Reference

4:197

FXTRACT—Extract Exponent and Significand

Description

Separates the source value in the ST(0) register into its exponent and significand, 
stores the exponent in ST(0), and pushes the significand onto the register stack. 
Following this operation, the new top-of-stack register ST(0) contains the value of the 
original significand expressed as a real number. The sign and significand of this value 
are the same as those found in the source operand, and the exponent is 3FFFH (biased 
value for a true exponent of zero). The ST(1) register contains the value of the original 
operand’s true (unbiased) exponent expressed as a real number. (The operation 
performed by this instruction is a superset of the IEEE-recommended logb(

x

) function.)

This instruction and the F2XM1 instruction are useful for performing power and range 
scaling operations. The FXTRACT instruction is also useful for converting numbers in 
extended-real format to decimal representations (e.g. for printing or displaying).

If the floating-point zero-divide exception (#Z) is masked and the source operand is 
zero, an exponent value of -

 is stored in register ST(1) and 0 with the sign of the 

source operand is stored in register ST(0).

Operation

TEMP 

 Significand(ST(0));

ST(0) 

 Exponent(ST(0));

TOP

 TOP 

 1;

ST(0) 

 TEMP;

FPU Flags Affected

C1

Set to 0 if stack underflow occurred; set to 1 if stack overflow 

occurred.

C0, C2, C3 

Undefined.

Floating-point Exceptions

#IS

Stack underflow occurred.
Stack overflow occurred.

#IA

Source operand is an SNaN value or unsupported format.

#Z

ST(0) operand is 

0.

#D

Source operand is a denormal value.

Additional Itanium System Environment Exceptions

Itanium Reg Faults Disabled FP Register Fault if PSR.dfl is 1, NaT Register Consumption 

Abort.

Opcode

Instruction

Description

D9 F4

FXTRACT

Separate value in ST(0) into exponent and significand, store 
exponent in ST(0), and push the significand onto the register 
stack.

Summary of Contents for ITANIUM ARCHITECTURE





























































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands