manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3, Manual

Share
Download
Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3 Manual Download Page 815

Volume 2, Part 2: Memory Management

2:567

6. Using the general registers from steps 4 and 5, execute the 

itr.i

 or 

itr.d

 

instruction.

A data or instruction serialization operation must be performed after the insert (for 

itr.d

 or 

itr.i

, respectively) before the inserted translation can be referenced.

Software may insert a new translation into a TR slot already occupied by another valid 
translation. However, software must perform a TR purge to ensure that the overwritten 
translation is no longer present in any of the processor's TLB structures.

Instruction TR inserts will purge any instruction TC entries which overlap the inserted 
translation, and may purge any data TC entries which overlap it. Data TR inserts will 
purge any data TC entries which overlap the inserted translation and may purge any 
instruction TC entries which overlap it.

Software may insert the same (or overlapping) translation into both the instruction TRs 
and the data TRs. This may be desirable for locked pages which contain both code and 
data, for example.

5.2.1.2

TR Purge

To purge a TR from the TLBs, software performs the following steps:

1. Place the base virtual address of the translation to be purged into a general 

register.

1

2. Place the address range in bytes of the purge into bits {7:2} of a second general 

register.

3. Using these two GRs, execute the 

ptr.d

 or 

ptr.i

 instruction.

A data or instruction serialization operation must be performed after the purge (for 

ptr.d

 or 

ptr.i

, respectively) before the translation is guaranteed to be purged from 

the processor's TLBs.

Note:

The TR purge instruction operates independently of the slot into which the 
translation was originally inserted.

A 

ptr.d

 instruction will never purge an overlapping translation in an instruction TR, but 

may purge an overlapping translation in an instruction TC; likewise, a 

ptr.i

 instruction 

will never purge an overlapping translation in a data TR, but may purge an overlapping 
translation in a data TC.

A TR purge does not modify the page tables nor any other memory location, nor does it 
affect the TLB state of any processor other than the one on which it is executed.

5.2.2

Translation Caches (TCs)

The TC array acts as a cache of the dynamic working set for data and instruction 
translations. It is managed by software (via 

itc

 and 

ptc

 instructions) and, optionally 

by hardware, if the processor provides a hardware page walker (HPW) and the walker is 
enabled. See 

Section 5.3

 below.

1.

The upper 3 bits (VRN) of this address specify a region register whose contents are used as part of
the translation to be purged. See 

Section 5.1.1

 for details.

Summary of Contents for ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands