manualshive.com logo in svg

Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3, Manual

Share
Download
Intel ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3 Manual Download Page 684

2:436

Volume 2, Part 1: Processor Abstraction Layer

PAL_MC_RESUME

PAL_MC_RESUME – Restore Minimal Architected State and Return 

(26)

Purpose:

Restores the minimal architectural processor state, sets the CMC interrupt if necessary, 
and resumes execution.

Calling Conv:

Static Registers Only

Mode:

Physical

Buffer:

Not dependent

Arguments:

Returns:

Status:

Description:

This procedure will restore the processor minimal architected state and optionally set 
the CMC interrupt.

If the 

set_cmci 

argument is set to one, this procedure will set the CMC interrupt and 

return to the interrupted context. The CMC interrupt handler will be invoked sometime 
after returning to the interrupted context.

The 

save_ptr 

argument specifies the processor min-state save area buffer from which 

the processor state will be restored. This pointer has the same alignment and size 
restrictions as the address passed to PAL_MC_REGISTER_MEM procedure on 

page 2:435

.

This procedure is used to resume execution of the interrupted context for both machine 
check and initialization events. This procedure can resume execution to the same 
context or a new context. If software attempts to resume execution for these events 
without using this call, processor behavior is undefined.

If the caller is resuming to the same context, the 

new_context 

argument must be set to 

0 and the 

save_ptr

 argument has to point to a copy of the min-state save area written 

by PAL when the event occurred.

If the caller is resuming to a new context, the new_context argument must be set to 1 
and the save_ptr argument must point to a new min-state save area set up by the 
caller.

Please see Section 11.3.3, “Returning to the Interrupted Process” on 

page 2:305

 3for 

more information on resuming to the interrupted context.

Argument

Description

index

Index of PAL_MC_RESUME within the list of PAL procedures.

set_cmci

Unsigned 64 bit integer denoting whether to set the CMC interrupt. A value of 0 indicates not 
to set the interrupt, a value of 1 indicated to set the interrupt, and all other values are 
reserved.

save_ptr

Physical address of min-state save area used to used to restore processor state.

new_context

Unsigned 64-bit integer denoting whether the caller is returning to a new context. A value of 
0 indicates the caller is returning to the interrupted context, a value of 1 indicates that the 
caller is returning to a new context.

Return Value

Description

status

Return status of the PAL_MC_RESUME procedure

a

.

a. This procedure returns to the caller only in an error situation.

Reserved

0

Reserved

0

Reserved

0

Status Value

Description

-2

Invalid argument

-3

Call completed with error

Summary of Contents for ITANIUM ARCHITECTURE - SOFTWARE DEVELOPERS VOLUME 3 REV 2.3











































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands