Intel II User Manual Download Page 37

Page: 37 / 96

Chapter 3 – Changing the Gateway Settings

Select the mode you want to use.

Click

Save/Next

to apply the change to the gateway.

In the wizard, you need to click

Save/Next

until you

see the

Save & Restart

button to activate and restart

your gateway.

Changing

Wireless

Gateway Mode

settings

If your Internet Service Provider has assigned settings to
access the Internet, the following sections help you find
the information you need to connect your gateway.

Step-by-step

From the Wireless Gateway Mode screen, click

Cable/DSL Settings

The following appears.

See

Changing IP settings

on page 34, or see

Changing cable or DSL settings

on page 34 for

specific information on changing any setting on the
screen.

Note

You will lose your connection if you are not

already connected to a DHCP server.

user_guide_rg1210.book Page 33 Monday, April 22, 2002 2:20 PM

Summary of Contents for II

































































































Search results

Summary of Contents for II

Reviews:

Related manuals for II

Brands by name

Popular brands

Intel II, User Manual

Search results

Summary of Contents for II

Reviews:

Related manuals for II

Brands by name

Popular brands