Intel® Server Board S2600TP and Intel® Compute Module HNS2600TP Product Family
31
Figure 62.
Removing the Cable Connections from the Server Board
1.
Remove the eight screws from the server board (see letter
A
).
2.
Lift up the server board (see letter
B
).
Figure 63.
Removing the Server Board
2.14.2
Installing the Server Board
1.
Carefully lower the server board into the compute module so that the rear I/O connectors of the server
board align with and are fully seated into the matching holes on the compute module back panel.
2.
The server board is accurately placed when the two end screws nearest the front edge of the server board
(see letter
A
) sit securely onto the shouldered compute module standoffs.
3.
Fasten the eight screws (see letter
B
).
