Intel® Server Board S2600TP and Intel® Compute Module HNS2600TP Product Family
9
2
Hardware Installations and Upgrades
2.1
Before You Begin
Before working with your server product, pay close attention to the Safety Information at the beginning of
this manual.
Note:
Whenever you service the compute module, you must first power down the server and unplug all
peripheral devices and the AC power cord.
2.1.1
Tools and Supplies Needed
•
Phillips* (cross head) screwdriver (#1 bit and #2 bit)
•
Needle nosed pliers
•
Anti-static wrist strap and conductive foam pad (recommended)
2.1.2
System Reference
All references to left, right, front, top, and bottom assume that the reader is facing the front of the chassis as
it would be positioned for normal operation.
2.2
Cable Routing
Each compute module is installed in tray and can be hot swapped without any impact to other compute
modules.
When you add or remove components from compute module tray, make sure your cables are routed
correctly before plugging in the compute module tray back to the chassis. Use caution to make sure no
cables or wires are pinched and that the airflow from the fans is not blocked. Use the figures below to
determine the correct cable routing.
