Hardware Installations and Upgrades
Intel
®
Server System H2000JF Family Service Guide
27
Figure 38. Installing Memory
Removing Memory
1.
Locate the DIMM sockets. Gently spread the retaining clips at each end of the socket. The
DIMM lifts from the socket.
2.
Holding the DIMM by the edges, lift it from the socket, and store it in an anti-static package.
Installing and Removing Hot-swap Hard Drive
Caution
: If you do not install all drives, empty drive bays must be occupied by carriers with blank
plastic drive provided to maintain proper system cooling.
Installing a Hard Disk Drive into 3.5" Hard Drive Carrier
1.
Remove the four screws securing the HDD interface bracket and install 3.5" HDD with screws
shown in letter
A
.
Figure 39. Installing Hard Disk Drive – installing 3.5" HDD to Carrier
2.
With the lever open, insert the hard disk drive assembly into the chassis (see letter
A
). Push in
the lever to lock it into place (see letter
B
).
