Hardware Installations and Upgrades
18
Intel
®
Server System H2000JF Family Service Guide
2.
Push the Node Tray along the rail until the latch locks in position with a “tick” sound.
Figure 24. Installing the Node Tray
Removing and Installing the Redundant Power Supply Unit
The system equipped with two CRPS for redundancy. Each of them can be hot swappable.
Removing the Power Supply Unit
1.
Carefully push in the latch on the right hand of PSU.
2.
Pull the handle with the PSU while still pressing the latch.
Figure 25. Removing the PSU
Installing the Power Supply Unit
1.
Align and slide in the PSU to the power cage rail.
2.
Push the PSU along the rail until the latch locks in position with a “tick” sound.
