Hardware Installations and Upgrades
16
Intel
®
Server System H2000JF Family Service Guide
Note:
A non-skid surface or a stop behind the server system may be needed to prevent the server
system from sliding on your work surface.
1.
Observe the safety and ESD precautions at the beginning of this book.
2.
Turn off all peripheral devices connected to the server. Turn off the server.
3.
Disconnect the power cord.
4.
Remove the screws (see letter
A
).
5.
Lift the top cover from front end to more than 45 degrees (see letter
B
).
6.
Remove the top cover.
Figure 21. Removing the System Top Cover
Installing the System Cover
1.
Place system cover onto the chassis and slide forward to engage recessed edge at front of
cover (see letter
A
).
2.
Rotate the front end of top cover down to position and fix screws (see letter
B
).
