USER MANUAL
INTEL® FALCON™ 8+ UAS
© 2018 Intel Corporation. All rights reserved
50
2.5.5.2. Camera control by the CTR
This section describes how the Sony RX1R II can be operated by using the functional
elements of the Intel Cockpit Controller (CTR).
Figure 2.21: Sony RX1R II CTR control layout
Push Button B1
(1): sets the camera to pre-
defined /-90°, +/-45° and 0° when
Rocker Switch R1
(4) is pushed simultaneously
(see “Setting the Camera Angle” on page 33 for
details).
Push Button B2
(2): activates the camera set-
tings mode (the viewfinder image on the touch-
screen tablet turns black and the screen will
display
Connecting... USB
, like shown to
the left).
Pushing
B2
while in the camera settings mode
scrolls through the available adjustable settings
(ISO, shutter speed, exposure compensation).
Rocker Switch R2
(5): by moving this switch up/
down, the value of the setting selected with
B2
can be adjusted up or down.
Please note that the adjustable settings depend
on the selected exposure mode of the camera,
P(rogram), A(perture), S(hutter), M(anual) which
is selected on the camera. If no button is
pressed within 10 seconds the camera changes
back to the picture capture mode and the view-
finder image becomes visible again.
Push Button B3
(3): trigger button, when in pic-
ture capture mode, it triggers the camera. Press-
ing the trigger button while in the camera
settings mode brings you back to the picture
capture mode.
Rocker Switch R1
(4): camera tilt, changes the
angle smoothly.
1
2
3
4
5
