Intel Desktop Boards D850EMD2 and D850EMV2
7
Quick Reference
Installation Steps
1 Installing the I/O Shield
The desktop boards come with an I/O shield. Install the I/O shield before
installing the desktop board in the chassis. Place the shield inside the chassis as
shown in the following figure. Press the shield into place so that it fits tightly
and securely. If the shield doesn’t fit, obtain a properly sized shield from the
chassis supplier.
OM13621
2 Installing the Desktop Board
CAUTION
Failure to use an ATX12V power supply, or not connecting the additional
power supply lead to the Desktop Board D850EMV2 or D850EMD2 may
result in damage to the desktop board. For more information on the
ATX12V power supply, refer to the Intel Desktop Boards D850EMD2 and
D850EMV2 Product Guide on the Intel
Express Installer CD-ROM.
Refer to your chassis manual for specific instructions on installing and removing
the desktop board from the chassis.
The Desktop Board D850EMD2 is secured to the chassis with 11 screws and
Desktop Board D850EMV2 with eight screws. Refer to the board illustration on
page 4 for the location of the mounting holes.
