Intel Desktop Boards D850EMD2 and D850EMV2
3
Quick Reference
Before You Begin
Warning and Cautions
WARNING
Disconnect the desktop board’s power supply from its AC power
source before you connect or disconnect cables, or install or remove
any board components. Failure to do this can result in personal
injury or equipment damage. Some circuitry on the desktop board
can continue to operate even though the front panel power switch is
off.
CAUTION
Electrostatic discharge (ESD) can damage desktop board components.
Install the board at an ESD-controlled workstation. If such a workstation
is not available, wear an antistatic wrist strap or touch the surface of the
antistatic package before handling the board.
CAUTION
Many of the internal connectors provide operating voltage (+5 V DC and
+12 V DC, for example) to devices inside the computer chassis, such as
fans and internal peripherals. These connectors are not overcurrent
protected. Do not use these connectors for powering devices external to
the computer chassis. A fault in the load presented by the external
devices could cause damage to the computer, the interconnecting cables,
and the external devices themselves.
Safety and Regulatory Notice
See the
Intel
®
Desktop Boards D850EMD2 and D850EMV2 Product Guide
for
all applicable regulatory compliance statements, product certification markings,
and safety and electromagnetic compatibility (EMC) standards and regulations
these desktop boards are compliant with.
Replacement battery warning label provided
: Place the label inside the chassis
in an easy-to-see location near the battery but not on the board itself.
Intended uses
: This product was evaluated as information technology
equipment (I.T.E.) for home or office use when installed into an appropriate
computer chassis. Other end uses or locations may require further evaluation.
