Intel D945GPM, Product Manual

Page: 41 / 72

Installing and Replacing Desktop Board Components
41
Connecting IEEE 1394a Headers
Before connecting the IEEE 1394a headers, observe the precautions in "Before You Begin" on
page 23. See Figure 20, B on page 39 for the location of the blue IEEE 1394a headers. Table 8
shows the pin assignments for the headers.
Table 8. IEEE 1394a Header Signal Names
Pin Signal Name Pin Signal Name
1 TPA1+ 2 TPA1-
3 Ground 4 Ground
5 TPA2+ 6 TPA2-
7 +12 V 8 +12 V
9 Key (no pin) 10 Ground
Connecting the Front Panel Header
Before connecting the front panel header, observe the precautions in "Before You Begin" on
page 23. See Figure 20, E on page 39 for the location of the multi-colored front panel header.
Table 9 shows the pin assignments for the front panel header.
Table 9. Front Panel Header Signal Names
Pin Signal In/Out Description Pin Signal In/Out Description
Hard Drive Activity LED (Orange) Power LED (Green)
1 HD_PWR Out Hard disk LED pull-
up (330
Ω
) to +5 V
2 HDR_BLNK_GRN Out Front panel green
LED
3 HDA# Out Hard disk active LED 4 HDR_BLNK_YEL Out Front panel yellow
LED
Reset Switch (Purple) On/Off Switch (Red)
5 Ground Ground 6 SWITCH_ON# In Power switch
7 FP_RESET# In Reset switch 8 Ground Ground
9 5+ V
Reserved. Do not use.
10 No pin No pin
Connecting Hi-Speed USB 2.0 Headers
Before connecting the USB 2.0 headers, observe the precautions in "Before You Begin" on
page 23. See Figure 20, F on page 39 for the location of the black USB 2.0 headers.
Table 10 shows the pin assignments for the headers.
Table 10. Hi-Speed USB 2.0 Header Signal Names
USB Port A USB Port B
Pin Signal name Pin Signal name
1 Power 2 Power
3 D- 4 D-
5 D+ 6 D+
7 Ground 8 Ground
9 Key 10 No connect
Note: USB ports may be assigned as needed.