Intel Core i7 Extreme Edition Datasheet Download

Page: 82 / 102

Thermal Specifications

Datasheet

6.2

Processor Thermal Features

6.2.1

Processor Temperature

A new feature in the Intel Core™ i7 processor Extreme Edition and Intel Core™ i7
processor is a software readable field in the IA32_TEMPERATURE_TARGET register that
contains the minimum temperature at which the TCC will be activated and PROCHOT#
will be asserted. The TCC activation temperature is calibrated on a part-by-part basis
and normal factory variation may result in the actual TCC activation temperature being
higher than the value listed in the register. TCC activation temperatures may change
based on processor stepping, frequency or manufacturing efficiencies.

Note:

There is no specified correlation between DTS temperatures and processor case

temperatures; therefore it is not possible to use this feature to ensure the processor

case temperature meets the Thermal Profile specifications.

6.2.2

Adaptive Thermal Monitor

The Adaptive Thermal Monitor feature provides an enhanced method for controlling the

processor temperature when the processor silicon exceeds the Thermal Control Circuit

(TCC) activation temperature. Adaptive Thermal Monitor uses TCC activation to reduce

processor power via a combination of methods. The first method (Frequency/VID

control, similar to Thermal Monitor 2 (TM2) in previous generation processors) involves

the processor reducing its operating frequency (via the core ratio multiplier) and input

voltage (via the VID signals). This combination of lower frequency and VID results in a

reduction of the processor power consumption. The second method (clock modulation,

known as Thermal Monitor 1 (TM1) in previous generation processors) reduces power

consumption by modulating (starting and stopping) the internal processor core clocks.

The processor intelligently selects the appropriate TCC method to use on a dynamic

basis. BIOS is not required to select a specific method (as with previous-generation

processors supporting TM1 or TM2). The temperature at which Adaptive Thermal

Monitor activates the Thermal Control Circuit is factory calibrated and is not user

configurable. Snooping and interrupt processing are performed in the normal manner

while the TCC is active.

When the TCC activation temperature is reached, the processor will initiate TM2 in

attempt to reduce its temperature. If TM2 is unable to reduce the processor

temperature then TM1 will be also be activated. TM1 and TM2 will work together (clocks

will be modulated at the lowest frequency ratio) to reduce power dissipation and

temperature.

With a properly designed and characterized thermal solution, it is anticipated that the

TCC would only be activated for very short periods of time when running the most

power intensive applications. The processor performance impact due to these brief

periods of TCC activation is expected to be so minor that it would be immeasurable. An

under-designed thermal solution that is not able to prevent excessive activation of the

TCC in the anticipated ambient environment may cause a noticeable performance loss,

and in some cases may result in a T

CASE

that exceeds the specified maximum

temperature and may affect the long-term reliability of the processor. In addition, a

thermal solution that is significantly under-designed may not be capable of cooling the

processor even when the TCC is active continuously. Refer to the appropriate processor

Thermal and Mechanical Design Guide (see

Section 1.2

) for information on designing a

compliant thermal solution.

The Thermal Monitor does not require any additional hardware, software drivers, or

interrupt handling routines. The following sections provide more details on the different

TCC mechanisms used by the Intel Core™ i7 processor Extreme Edition and Intel

Core™ i7 processor.

Summary of Contents for Core i7 Extreme Edition







































































































Search results

Summary of Contents for Core i7 Extreme Edition

Reviews:

Related manuals for Core i7 Extreme Edition

Brands by name

Popular brands

Intel Core i7 Extreme Edition, Datasheet

Search results

Summary of Contents for Core i7 Extreme Edition

Reviews:

Related manuals for Core i7 Extreme Edition

Brands by name

Popular brands