BIOS Setup Utilities
60
Intel
®
Compute Module MFS2600KI User Guide
Comments:
This is a security option. When
Disabled
, the system cannot be booted
directly to a USB device of any kind. USB Mass Storage devices may still be used for data
storage.
If the
USB controller
setting is
Disabled
, this field is grayed out and inactive.
6.
Device Reset Timeout
Option Values:
10 seconds
20 seconds
30 seconds
40 seconds
Help Text:
USB Mass Storage device Start Unit command timeout.
Setting to a larger value provides more time for a mass storage device to be ready, if
needed.
Comments:
If the
USB controller
setting is
Disabled
, this field is grayed out and
inactive.
7.
Mass Storage Devices:
Option Values:
Auto
Floppy
Forced FDD
Hard Disk
CD-ROM
Help Text:
[Auto] - USB devices less than 530 MB are emulated as floppies.
[Forced FDD] - HDD formatted drive is emulated as an FDD (e.g., ZIP drive).
Comments:
This field is hidden if no USB Mass Storage devices are detected.
This setup screen can show a maximum of eight USB Mass Storage devices on the screen. If
more than eight devices are installed in the system, the ‘USB Devices Enabled’ displays the
correct count but only the first eight devices discovered are displayed in this list.
If the
USB controller
setting is
Disabled
, this field is grayed out and inactive.
System Acoustic and Performance Configuration
The System Acoustic and Performance Configuration screen allows the user to configure the
thermal control behavior of the system with respect to what parameters are used in the system’s Fan
Speed Control algorithms.
This screen is only available for platforms which have a BMC. Non-BMC platforms use a different
Fan Speed Control mechanism configured from the Hardware Monitor screen.
To access this screen from the
Main
screen, select
Advanced > System Acoustic and
Performance Configuration
. To move to another screen, press the <Esc> key to return to the
Advanced
screen, then select the desired screen.