manualshive.com logo in svg

Intel Compute Module MFS2600KI, User Manual, Page: 63 / 111

Share
Download
Intel Compute Module MFS2600KI User Manual Download Page 63

BIOS Setup Utilities 

52  

 

Intel

®

 Compute Module MFS2600KI User Guide 

Comments: 

 

Information only

. The Drive Information, when present, will typically 

consist of the drive model identification and size for the disk drive installed on a particular port. 

This Drive Information line is repeated for both SATA Ports for the onboard AHCI capable 
SATA Controller.  

 

PCI Configuration 

The PCI Configuration screen allows the user to configure the PCI memory space used for onboard 
and add-in adapters, configure video options, and configure onboard adapter options. 

It also includes a selection option to go to the NIC Configuration screen. 

To access this screen from the 

Main

 screen, select 

Advanced

 > 

PCI Configuration

. To move to 

another screen, press the <Esc> key to return to the 

Advanced

 screen, then select the desired 

screen. 

 

Figure 31. PCI Configuration Screen

 

Screen Field Descriptions: 

1.

 

Maximize Memory below 4GB 

Summary of Contents for Compute Module MFS2600KI
















































































































Reviews:

No comments