Hardware Installations and Upgrades
Intel
®
Compute Module MFS2600KI User Guide
15
2.
Holding the DIMM blank, lift it from the socket
Figure 14 Removing DIMM Blank
Installing Memory
1.
Locate the DIMM sockets. Make sure the clips at either end of the DIMM socket(s) are pushed
outward to the open position (see letter
A
).
2.
Holding the DIMM by the edges, remove it from its anti-static package. Position the DIMM
above the socket. Align the notch on the bottom edge of the DIMM with the key in the DIMM
socket (see letter
B
).
3.
Insert the bottom edge of the DIMM into the socket (see letter
C
). When the DIMM is inserted,
push down on the top edge of the DIMM until the retaining clips snap into place (see letter
D
).
Make sure the clips are firmly in place (see letter
E
).
Figure 15. Installing Memory
Removing Memory
1.
Locate the DIMM sockets. Gently spread the retaining clips at each end of the socket. The
DIMM lifts from the socket.
2.
Holding the DIMM by the edges, lift it from the socket, and store it in an anti-static package.