Intel Compute Module MFS2600KI, User Manual, Page: 15 / 111

Compute Module Features
4 Intel
®
Compute Module MFS2600KI User Guide
Jumper Name Pins What happens at system reset…
J1F4: BIOS Recover 1-2

BIOS Recovery – Disabled

These pins should have a jumper in place for normal operation. (Default)
2-3

BIOS Recovery – Enabled

If these pins are jumpered, the compute module boots from the emergency
BIOS image. These pins should
not be jumpered for normal operation.
J1F5: ME Force Update 1-2

ME Firmware Force Update Mode – Disabled (Default)
2-3

ME Firmware Force Update Mode – Enabled
J1F8: CMOS Clear 1-2

CMOS Clear – Disabled

These pins should have a jumper in place for normal operation. (Default)
2-3

CMOS Clear – Enabled

If these pins are jumpered, the CMOS settings are cleared on the next
boot. These pins should not be jumpered for normal operation
J1F9: Password Clear
1-2

Password Clear – Disabled

These pins should have a jumper in place for normal operation. (Default)
2-3

CMOS Clear – Enabled

To clear administrator and user passwords, power on the system with pins
2-3 connected. The administrator and user passwords clear in 5-10
seconds after power on. Pins 2-3 should not be connected for normal
system operation.
Front Panel Connectors and Indicators
A USB ports 0 and 1 G NIC 1 LED
B USB ports 2 and 3 H Hard Drive Activity LED
C Video I ID LED
D I/O Mezzanine NIC 4 LED J Power button
E I/O Mezzanine NIC 3 LED K Power and Fault LEDs
F NIC 2 LED
Figure 4. Front Panel Connectors and Indicators