Intel BX80623G530 Specification Download Page 9

Page: 9 / 64



Specification Update

Summary Tables of Changes

The following tables indicate the errata, specification changes, specification

clarifications, or documentation changes which apply to the processor. Intel may fix

some of the errata in a future stepping of the component, and account for the other

outstanding issues through documentation or specification changes as noted. These

tables uses the following notations:

Codes Used in Summary Tables

Stepping

Errata exists in the stepping indicated. Specification Change or

Clarification that applies to this stepping.

(No mark)
or (Blank box):

This erratum is fixed in listed stepping or specification change

does not apply to listed stepping.

Page

(Page):

Page location of item in this document.

Status

Doc:

Document change or update will be implemented.

Plan Fix:

This erratum may be fixed in a future stepping of the product.

Fixed:

This erratum has been previously fixed.

No Fix:

There are no plans to fix this erratum.

Row

Change bar to left of a table row indicates this erratum is either new or modified from

the previous version of the document.

Summary of Contents for BX80623G530

































































Search results

Summary of Contents for BX80623G530

Reviews:

Related manuals for BX80623G530

Brands by name

Popular brands

Intel BX80623G530, Specification

Search results

Summary of Contents for BX80623G530

Reviews:

Related manuals for BX80623G530

Brands by name

Popular brands