Thermal/Mechanical Design Guide
9
Introduction
§
TDP
Thermal Design Power: Thermal solution should be designed to dissipate this target
power level. TDP is not the maximum power that the processor can dissipate.
Thermal Monitor
A power reduction feature designed to decrease temperature after the processor has
reached its maximum operating temperature.
Thermal Profile
Line that defines case temperature specification of the TTV at a given power level.
TIM
Thermal Interface Material: The thermally conductive compound between the heatsink
and the processor case. This material fills the air gaps and voids, and enhances the
transfer of the heat from the processor case to the heatsink.
T
AMBIENT
The measured ambient temperature locally surrounding the processor. The ambient
temperature should be measured just upstream of a passive heatsink or at the fan inlet
for an active heatsink.
T
SA
The system ambient air temperature external to a system chassis. This temperature is
usually measured at the chassis air inlets.
Table 1-2.
Terms and Descriptions (Sheet 2 of 2)
Term
Description
Summary of Contents for BX80616I3540
