manualshive.com logo in svg

Intel ARCHITECTURE IA-32, Reference Manual, Page: 452 / 568

Share
Download
Intel ARCHITECTURE IA-32 Reference Manual Download Page 452

IA-32 Intel® Architecture Optimization

A-18

The Intel Thread Checker product is an Intel VTune Performance 
Analyzer plug-in data collector that executes your program and 
automatically locates threading errors. As your program runs, the Intel 
Thread Checker monitors memory accesses and other events and 
automatically detects situations which could cause unpredictable 
threading-related results. The Intel Thread Checker detects thread 
deadlocks, stalls, data race conditions and more.

Figure A-2 Intel Thread Checker Can Locate Data Race Conditions

Summary of Contents for ARCHITECTURE IA-32

























































































































































































































































































































































































































































































































































































Reviews:

No comments