manualshive.com logo in svg

Intel ARCHITECTURE IA-32, Reference Manual, Page: 433 / 568

Share
Download
Intel ARCHITECTURE IA-32 Reference Manual Download Page 433

Power Optimization for Mobile Usages

9

9-19

imbalance can be accomplished using performance monitoring 
events. Intel Core Duo processor provides an event for this 
purpose. The event (Serial_Execution_Cycle) increments under 
the following conditions:

— The core is actively executing code in C0 state,

— The second core in the physical processor is in an idle state 

(C1-C4).

This event enables software developers to find code that is 
executing serially, by comparing Serial_Execution_Cycle and 
Unhalted_Ref_Cycles. Changing sections of serialized code to 
execute into two parallel threads enables coordinated thread 
synchronization to achieve better power savings. 

Although Serial_Execution_Cycle is available only on Intel 
Core Duo processors, application thread with load-imbalance 
situations usually remains the same for symmetric application 
threads and on symmetrically configured multi-core processors, 
irrespective of differences in their underlying microarchitecture. 
For this reason, the technique to identify load-imbalance 
situations can be applied to multi-threaded applications in 
general, and not specific to Intel Core Duo processors.

Summary of Contents for ARCHITECTURE IA-32

























































































































































































































































































































































































































































































































































































Reviews:

No comments