manualshive.com logo in svg

Intel ARCHITECTURE IA-32, Reference Manual, Page: 431 / 568

Share
Download
Intel ARCHITECTURE IA-32 Reference Manual Download Page 431

Power Optimization for Mobile Usages

9

9-17

demands only 50% of processor resources (based on idle history). The 
processor frequency may be reduced by such multi-core unaware P-state 
coordination, resulting in a performance anomaly. See Figure 9-5: 

Software applications have a couple of choices to prevent this from 
happening:

•

Thread affinity management: A multi-threaded application can 
enumerate processor topology and assign processor affinity to 
application threads to prevent thread migration. This can work 
around the issue of OS lacking multi-core aware P-state 
coordination policy.

•

Upgrade to an OS with multi-core aware P-state coordination 
policy: Some newer OS releases may include multi-core aware 
P-state coordination policy. The reader should consult with specific 
OS vendors. 

Multi-core Considerations for C-States

There are two aspects that impact C-states on multi-core processors:

1.

Multi-core-unaware C-state coordination may not fully realize 
power savings.

When each core in a multi-core processor meets the 
requirements necessary to enter a different C-state type, 
multi-core-unaware hardware coordination causes the physical 

Figure 9-5

Thread Migration in a Multi-Core Processor

Core 1

Core 2

active

Idle

active

Idle

Summary of Contents for ARCHITECTURE IA-32

























































































































































































































































































































































































































































































































































































Reviews:

No comments