Intel AFCSASRISER, User Manual, Page: 119 / 192

Intel
®
RAID Software User’s Guide 107
Figure 53. Option to Close the Configuration Wizard
If you select Yes , the configuration procedure closes. If you select No , the dialog box
closes and you remain on the same page.
Creating a Virtual Drive Using Advanced Configuration
The advanced configuration procedure provides an easy way to create a new storage
configuration. Advanced configuration gives you greater flexibility than simple configuration
because you can select the drives and the virtual drive parameters when you create a virtual
drive. In addition, you can use the advanced configuration procedure to create spanned drive
groups.
Follow these steps to create a new storage configuration in the advanced configuration mode.
In this example, we will create a spanned drive group.
1. Perform either of the following steps:
— Right click on the controller node in the device tree in the left frame of the Intel
®
RAID Web Console 2 window and select Create Virtual Drive
— Select the controller node and select Go To -> Controller -> Create Virtual Drive in
the menu bar, as shown in Figure 54