Development Kit Features
2
nd
Generation Intel
®
Core™ Processor with Intel
®
6 Series Chipset Development Kit
User Guide
March 2011
38
Document Number: 325208-001
used for eDP switchable graphics, Ports C and D can be used (see the following
procedure).
Switchable Graphics with eDP over PCH
Display Port D of the PCH can be configured as eDP (Embedded Display Ports). The
development board can support switchable graphics with eDP, from the PCH, as
display.
Figure 8. Switchable Graphics with eDP from PCH
eDP over Port D
Use the following step:
1.
Connect a cable from on-board DP (J5A1) connector to Elk Creek DP
Connector.
3.2.8
USB Connectors
3.2.8.1
USB2.0
The PCH provides fourteen USB 2.0/1.1 ports.
Two ports (0 and 1) are routed to a stacked dual USB and DP connector (J5A1), and
two (ports 2 and 3) are routed to a stacked dual USB2.0 connector (J3A2) at the back
panel.
Two more USB ports (8 and 9) are routed to RJ45 plus Dual USB Connector (J4A1) on
the back of the chassis.
