30
Datasheet
Electrical Specifications
NOTES:
1. The loadline specification includes both static and transient limits except for overshoot allowed as shown in
.
2. This loadline specification shows the deviation from the VID set point.
3. The loadlines specify voltage limits at the die measured at the VCC_SENSE and VSS_SENSE lands. Voltage regulation
feedback for voltage regulator circuits must be taken from processor V
CC
and V
SS
lands. Refer to the
Voltage Regulator
Down (VRD) 10.1 Design Guide For Desktop LGA775 Socket
for socket loadline guidelines and VR implementation details.
4. Adherence to this loadline specification for the processor is required to ensure reliable processor operation.
Figure 2-3. V
CC
Static and Transient Tolerance for 775_VR_CONFIG_04B
VID - 0.000
VID - 0.019
VID - 0.038
VID - 0.057
VID - 0.076
VID - 0.095
VID - 0.114
VID - 0.133
VID - 0.152
VID - 0.171
VID - 0.190
VID - 0.209
VID - 0.228
0
10
20
30
40
50
60
70
80
90
100
110
120
Icc [A]
V
cc [V
]
Vcc Maximum
Vcc Typical
Vcc Minimum
Summary of Contents for 520J - Pentium 4 2.80GHz 800MHz 1MB Socket 775 CPU
