Intel 480T, User Manual

Page: 46 / 367

44
C H A P T E R 3 Accessing the Switch
Configuring Management Access
The local management software supports the following two levels
of management:
• User
• Administrator
In addition to the management levels, you can optionally use an
external RADIUS server to provide CLI command authorization
checking for each command. For more information on RADIUS,
refer to “RADIUS
*
Client” later in this chapter.
unconfig switch {all} Resets all switch parameters (with the
exception of defined user accounts, and
date and time information) to the factory
defaults. If you specify the keyword
all
,
the switch erases the currently selected
configuration image in flash memory and
reboots. As a result, all parameters are
reset to default settings.
Table 8: Common Commands (continued)
Command Description